As the professional manufacturer, we would like to provide you Double Track Wave Solderings. Over the years, with the support and loyalty of both new and existing customers at home and abroad, our products have been exported to Europe, America, Southeast Asia, and numerous other regions. This has helped us establish a strong corporate image and reputation.
* Humanized design, comprehensive consideration of the practicality of the filter equipment and the convenience of maintenance;
* Spray driven by stepping motor, uniform atomization, flow rate and speed controllable;
* Independently control the full hot air preheating zone, so that the PCB can get a good preheating and welding effect;
* Patented alloy chain claws, non-stick tin, long life;
* High-strength wear-resistant guide rails, special anti-deformation structure to ensure that the guide rails are not deformed, and the board will not fall during transportation;
* Turbine, vortex rod, precision screw rod width adjustment, width adjustment accuracy less than 0.2mm;
* Tin furnace lifting and entering and exiting, automatic and manual combination.
|
Model |
300GS |
350GS |
|
Dimensions |
L3500×W2450×H1700mm |
L4300×W2550×H1750mm |
|
Rack sire |
L2800*W2400*H1600mm |
L3600×W2600×H1650mm |
|
Weight |
Approx：3000kg |
Approx：3500kg |
|
NAE DONN |
20×2=40KW |
25×2=50KW |
|
Operating power |
5*2=10KW |
6×2=12KW |
|
cored method |
Computer/Touch screen |
Computer/Touch screen |
|
Power SDUY |
AC380V 50HZ |
AC38OV 5OHZ |
|
Spray system |
||
|
Drive mode |
Stepping motor |
Stepping motor |
|
SENRY DRNNSARS |
0.3-0.5MPa |
0.3-0.5MPa |
|
Nozzle clearing |
Auto Wash |
Auto Wash |
|
Flux flow control |
0-100mladjustable |
0-100ml adjustable |
|
Flux addition |
Auto/Manual |
Auto/Manual |
|
Exhaust pipe |
200nm in diameter |
200MVM in diameter |
|
Ventilation method |
Up Exhaust |
up Exhaust |
|
Preheating system |
||
|
Preheating method |
Hot air or IR tube |
Hot air or IR tube |
|
Number of preheating zones |
3*206 |
3×2=6 |
|
Preheating zone length |
1500mm |
1800mm |
|
Preheat temperature |
Room tempeatre-250C |
Room temperatue-250C |
|
Preheating tine |
Approx..15min |
Approx.15rmin |
|
Transportation System |
||
|
PCB width |
50-300mm |
50-350m |
|
PCB transport direction |
loft to right (right to left is possible) |
loft to right (right to left is possible) |
|
Transport speed |
0-2000mwmvimin |
0-2000mmv/min |
|
Transport height |
750+20mm |
750120mm |
|
PCB component height |
Top 120mm Bottom 12mm |
Tap 120mm Bottom 12mm |
|
Speed Control |
Frequency Variable frequency speed control |
Frequency Variable frequency speed control |
|
Titanium claw |
Double hookclaw/heavy claw |
Double hookclaw/heavy claw |
|
Rail angle |
3'-7' |
3'-7' |
|
Tin furnace system |
||
|
wave mode |
Motor Drive |
Motor Drive |
|
Tin furnace material |
SUS/titanium/nodular cast iron |
SUS/titanium alloy/ductile iron |
|
Tin furnace heating method |
External heating |
External heating |
|
Tin furnace power |
11×2*22w |
13.5×2=27kw |
|
Stove temperature |
Maximum 350℃ |
Maximum 350℃ |
|
Tin furnace capacity |
300*2=600Kg |
350*2=700Kg |
|
Peak motor power |
1/2HPx4 3P220VAC |
1/2HPx4 3P220VAC |
|
Tin furnace melting time |
APPRON 120mian |
APPROIK 120min |
|
Cooling system |
||
|
Cooling method |
Forced air |
Forced air |
|
Wash claws |
Auto |
Auto |
